Blog
A practical starting point for your engineering review.
Machine Vision Cable Selection: Connectors and Locks
Start a machine vision cable inquiry with the camera, host and installation route. A familiar connector shape is only one part of a reliable imaging connection.
Read article
M12 Coding and Pinout: D vs X and Wiring Views
Specify an M12 assembly by coding, contacts and wiring, then confirm its mechanical installation. The M12 name by itself is not a complete purchasing specification.
Read article
Continuous Flex vs Torsion: Specify Cable Motion
Separate fixed installation, repeated bending and torsion before selecting a cable. Describing the actual movement is more useful than asking for a cable that is simply flexible.
Read article
Panel-Mount Cable Fit: Cutout, Thickness and Clearance
A panel cable must fit the enclosure and the mating plug on both sides. Use a dimensioned installation drawing before releasing a panel cutout or cable order.
Read article
RS232, RS485 and TTL connections
Before ordering a serial cable or converter, identify the electrical interface at each end. RS-232, RS-485 and TTL-level UART connections are not interchangeable just because the plugs fit.
Read articleCable shielding and grounding
Plan shielding together with the equipment grounding design and cable route. A shielded cable label alone does not describe how the completed installation will handle interference.
Read articleUSB3 Vision Cable Length: Passive, Active or Optical?
Choose USB3 Vision cable length by the camera, host, power path and installed route. Compare passive, active and optical options before agreeing a sample acceptance test.
Read articleGigE Vision Packet Loss: Cable or Network?
Troubleshoot GigE Vision packet loss by separating the physical connection from network load and acquisition settings. Use controlled comparisons before deciding that a replacement cable is required.
Read articleCable Assembly RFQ Checklist: Drawing and Test Scope
Prepare a custom cable assembly RFQ with both interfaces, a view-labeled pin map, length and test requirements. A clear drawing revision makes quotations and sample acceptance easier to compare.
Read articleUSB-to-RS485 Wiring: Polarity, Termination and Timeouts
Check USB-to-RS485 wiring, A/B definitions, termination and device settings before replacing a converter cable. Use the manuals for both ends and document each isolation test.
Read articleLet’s work through your cable requirements.
A model number, connector pair or drawing is a useful place to start.