The short answer: your harness supplier supplies evidence, not the passport
The battery passport obligation sits with the economic operator that places the battery on the EU market — normally the EU manufacturer or importer — under Article 77 of Regulation (EU) 2023/1542. A cable and harness supplier does not register the passport, does not hold the battery's unique identifier, and does not sign the declaration of conformity. Its deliverable is narrower and more useful: a per-part material declaration plus a per-lot traceability and test record set that lets the pack maker populate the fields it actually owns.
Scope first, because half of the questionnaires that arrive are written for the wrong battery type. Article 77(1) limits the passport to three sub-types: EV batteries, LMT batteries (e-bikes, e-scooters, e-mopeds), and industrial batteries with a capacity above 2 kWh. Portable batteries, SLI batteries and industrial batteries of 2 kWh or less fall outside the passport requirement as it stands (TracePass, Annex XIII field summary). The commonly cited application date is 18 February 2027 for batteries placed on the market or put into service in the EU (BD Emerson summary of Regulation (EU) 2023/1542). Written requests, however, are dated — verify the date against the current consolidated text before you quote it in a customer reply.
Where the request overreaches, say so in the first reply. If a questionnaire asks a harness supplier for battery carbon footprint, state of health, cell chemistry or cycle life, those are not harness-owned fields, and answering them with a generic "compliant" is a liability, not a service.
Ownership matrix: who can answer which passport field
Use this split to rewrite the incoming questionnaire before anyone signs it. The right-hand column is deliberately short — the "gap" rows are the ones that protect you.
| Passport field group | Accountable owner | What the harness / cable supplier can give | Status |
|---|---|---|---|
| Passport registration, unique identifier, declaration of conformity, model identity | Pack maker / economic operator placing the battery on the market | Nothing directly; part numbers and revision history as reference data | Gap (not harness-owned) |
| Cell chemistry, hazardous substances at cell level, cell performance and cycle-life evidence | Cell maker | Nothing; no equivalent data exists at harness level | Gap (not harness-owned) |
| State of health and dynamic status data | Pack maker, BMS supplier or both | Nothing; a harness continuity or hipot record is not state of health | Gap (not harness-owned) |
| Battery carbon footprint declaration (phased; marked not to be filled on 18 February 2027 in the Commission's data-point guidance) | Pack maker / economic operator, built from cell and material inputs | Assembly mass by material, so the pack maker can compute its own input — not a completed footprint | Input only |
| Recycled content shares (phased later than the passport baseline) | Material supplier / recycler, consolidated by the economic operator | Mill or chain-of-custody statements for copper and aluminium only where the document exists | Input only |
| Cable and assembly mass, material composition, insulation and jacket polymer type | Harness and cable supplier | Per part number, with stated calculation or weighing method | Owned |
| RoHS / REACH status of the assembly | Harness supplier, drawing on sub-supplier declarations | Declaration per part number with revision date, distinguishing tested from declared | Owned |
| Country of manufacture, lot genealogy, electrical and mechanical test records for the assembly | Harness supplier | Lot-level records linked to the shipment | Owned |
| Contact plating, housing polymer, connector mass and material declaration | Connector supplier | Pass-through of the connector maker's declaration, clearly attributed and dated | Input only |
Two notes on the matrix. First, "input only" means the harness supplier hands over a data block, not a conclusion — the pack maker performs the aggregation. Second, do not silently absorb connector-level chemistry. If the connector maker has not issued a current declaration, that is a named gap with a named owner, not something the harness supplier should paraphrase.
What a harness supplier can realistically produce — and how to prove it
Mass and material composition per part number
State the method: calculated from drawing dimensions and nominal densities, or physically weighed. State the unit and the tolerance, and resist false precision — a mass quoted to four decimals from a drawing calculation invites a challenge the supplier cannot answer. If the pack maker needs the figure inside a mass-balance calculation, the method statement is as important as the number.
Recycled content for copper and aluminium
This is where suppliers over-promise most often. A recycled-content figure is only defensible when a mill certificate or chain-of-custody record supports it, and a supplier declaration is not the same thing as a mass-balance claim. Where the record exists, disclose the calculation boundary (which production site, which period, which input stream). Where it does not exist, the honest answer is "not available at this time" plus the owner, not an assumed percentage.
RoHS and REACH declarations
Issue them per part number, dated, with the revision of the underlying sub-supplier declarations visible. Distinguish what was tested on the assembly from what was declared by sub-suppliers — a customer auditing the pack later will ask which is which, and a blended statement fails that audit. Reference exemptions where relevant rather than omitting them.
Insulation and jacket polymer type, ratings and test records
Polymer type, temperature rating and the relevant flame or electrical test records belong in the pack. Be precise about test scope: a component-level flame test is not a system-level certification for the enclosure or the battery rack, and no harness document should imply otherwise. Fire-safety questions about BESS DC runs are a separate evidence trail from the passport data request.
Country of manufacture and lot genealogy
Link cut, crimp, assembly and test records to the shipment. Define what a "lot" means in your own process — this matters when a single assembly mixes reels of cable or batches of connectors. A lot definition that is never written down is the most common reason a traceability claim collapses during a customer audit.
Change control
Re-issue the data pack when compound, plating, insulation source or manufacturing site changes. The pack maker needs to know which passport content may have gone stale, and a data pack without a revision history cannot answer that.
What the harness supplier cannot own — say it plainly
- Battery carbon footprint. This is a cell- and pack-level declaration built from material, cell and pack production data. Harness mass and composition are inputs. The phasing depends on methodology acts that are not fully settled, and the Commission's data-point guidance marks the carbon footprint as not to be filled on 18 February 2027 (Arianee summary of Commission guidance v2.0, 15 August 2026). Do not promise a date you cannot source.
- State of health, cycle life, cell chemistry, thermal-runaway behaviour. These belong to the cell maker, the BMS or the pack maker. A harness test report cannot substitute for any of them.
- Responsible sourcing and recycled content as legal obligations. These attach to battery materials and to the economic operator's due-diligence system. Accepting pass-through liability inside a customer questionnaire is a contract question, not a data question — route it to legal review before signing.
When a requested field is not owned, return a structured gap note: field name, reason it is not harness-owned, suggested owner, and the evidence the pack maker should request instead. Buyers trust a supplier that names its boundary far more than one that answers every line with "compliant".
Granularity and format: part number, lot, or shipment?
The default that works: material declaration at part number, traceability and test evidence at lot, shipment record linking delivered lots to the customer's receiving document. Part-level-only data is usually insufficient, because the pack maker may later need to trace a specific battery batch back to a cable lot when a declaration changes.
| Data item | Granularity | Format |
|---|---|---|
| Mass, composition, polymer type | Part number | PDF for sign-off, CSV for the customer's system |
| RoHS / REACH declaration | Part number, dated revision | Signed PDF plus source-document reference |
| Crimp pull-test, continuity, hipot records | Lot | PDF extract per shipment |
| Country of manufacture, lot genealogy | Lot and shipment | CSV keyed to customer PO line |
Three practical points. Version everything — every file carries a date and a revision, and the data pack includes a source-document column so the pack maker can trace each value back. Map to customer systems where required: IMDS basic-substance expectations and SCIP article requirements are customer-driven formats, and a supplier should not claim a completed SCIP submission unless it has actually filed one. Agree retention contractually rather than quoting an unsupported number — the pack maker's own passport duty drives the retention period.
Finally, define your averaging rule. A "representative lot" must be a defined quantity from a defined period and site. Do not average across suppliers or sites without disclosing the method.
Data points are not fields — and the published counts disagree
Secondary trackers do not agree on the numbers, which is exactly why a supplier should not quote a count in a customer reply. One summary of Commission guidance v2.0 lists 71 data points, with 46 mandatory for EV batteries, 49 for LMT and 32 for industrial batteries above 2 kWh on 18 February 2027 (Arianee, linked above). Another tracker, citing guidance v3.2, gives 46 / 49 / 31 and notes that its own template models the 71 data points as 142 fields, with 56 required fields for EV batteries — because one data point can span several fields (TracePass, linked above). Both are interpretations; Annex XIII in the Regulation is the authoritative text. For a harness supplier the practical consequence is simple: respond to the field list your customer actually sends, and mark each line owned, input-only or gap.
Pre-reply verification checklist
- Convert the questionnaire into a field register. Five columns: requested field, legal or customer source, internal owner, evidence document, gap status.
- Check scope before answering. Battery type, capacity above 2 kWh, and the placing-on-market date. Do not answer passport fields for portable or SLI batteries that fall outside Article 77.
- Verify each claim against a dated source document. Mill certificate, sub-supplier declaration, test report or drawing — and confirm the document's part number, revision and test scope match the RFQ.
- Separate tested from declared. Label every line so the pack maker knows which evidence is your own measurement and which is a sub-supplier statement.
- Escalate unowned fields as gaps with an owner and a due date. Never invent a certificate number, a test result or a material percentage to close a line.
- Have legal or compliance review any wording that makes the harness supplier responsible for pack-level declarations. Do not sign the customer's declaration text without understanding the liability.
- Pilot on one representative assembly before committing to a turnaround for a full BOM. Missing lot records surface in the pilot, not in the audit.
Frequently asked questions
Does a cable harness supplier need to create its own EU battery passport?
No. The passport duty under Article 77 applies to the economic operator placing the battery on the EU market — normally the manufacturer or importer. The harness supplier provides upstream evidence; it does not register or host a passport for a component.
Which passport data can a harness supplier actually provide?
Assembly mass and material composition, insulation and jacket polymer type, RoHS/REACH status per part number, country of manufacture, lot genealogy, and electrical and mechanical test records for the assembly — plus pass-through connector declarations where the connector maker has issued them.
Is recycled content data for copper cable required in the 2027 battery passport?
Recycled content is a phased obligation that sits with the economic operator and its material supply chain, and the Commission's data-point guidance marks it as not to be filled at the February 2027 baseline. A harness supplier should provide a recycled-content figure only where a mill certificate or chain-of-custody record supports it, and should name the calculation boundary.
What traceability level should a pack maker require: part number, lot, or shipment?
All three, applied to different data. Material declarations at part number, test and process evidence at lot, and a shipment record that links delivered lots to the receiving document. Part-level data alone usually cannot support a later batch-specific enquiry.
Send your BOM and passport data template
Send your pack BOM and passport data template — we will return a sample material and traceability data pack for one harness assembly within 5 working days. Mark on the template which fields you believe are harness-owned; we will return those populated, the input-only fields flagged as inputs, and the rest listed as gaps with a suggested owner. You can test the format against your own passport workflow before committing a full BOM, and request a custom harness data pack and quote against the same structure.